Oilseed Processing Showdown Screw Press vs Solvent Extraction
2026/11/09
A screw oil press squeezes oil from seed with mechanical force. Solvent extraction dissolves and recovers oil chemically. Neither oil extraction method is universally superior. The choice depends on scale, budget, and quality targets. For oilseed processing, an expeller press suits smaller, chemical-free operations. Mechanical pressing and solvent extraction differ sharply: solvent extraction maximizes recovery at large industrial scale. Buyers comparing oil extraction methods should match the approach to their project and consult oilseed processing equipment suppliers.
Key Takeaways
- Screw presses work best for small farms and organic oils because they avoid chemicals and cost less to start.
- Solvent extraction recovers almost all the oil and suits large factories that need high volume and low unit cost.
- Your choice depends on your budget, scale, and quality goals, so compare both methods carefully before you invest.
How Screw Press and Solvent Extraction Work
Screw Oil Press Mechanics
A screw oil press feeds cleaned seed into a horizontal barrel. A rotating worm shaft compresses the seed against a stationary cage. The barrel narrows along its length, so pressure rises steadily. Friction and applied heat liquefy the oil, and the oil drains through small openings in the cage. The remaining solid cake exits as a dense pellet. This mechanical screw pressing relies on force alone, with no chemical aid. Operators call the full sequence the expeller pressed process. A single screw type machine handles the entire pressing process from feed to cake discharge.
Solvent Extraction Process
The solvent extraction process begins with flaked seed. The flakes pass through a solvent bath, and the solvent dissolves the oil. Distillation then separates oil from solvent, and the solvent returns to the circuit. This solvent-based extraction process recovers far more oil than mechanical extraction alone. Many plants combine the two methods: an expeller press removes the bulk of the oil first, and solvent extraction equipment recovers the remainder. The combined route is often called the solvent extracted process or the solvent expelled route.
Typical Applications for Each Method
Small farms and specialty producers favor expeller pressing for cold-pressed and organic oils. Large crushing plants choose solvent expelling for high-volume commodity oils such as soybean and canola. Mid-size operations often run a mechanical press alongside vegetable oil solvent extraction equipment. Each method fits a distinct scale and product goal.
Oil Recovery and Product Value
Extraction Efficiency Compared
Recovery rates separate the two methods most clearly. A screw oil press leaves measurable oil behind in the cake, while solvent extraction pulls nearly all of it out. Encyclopedia.pub reports that mechanical extraction leaves 5–10% residual oil by weight, and cold pressing of rapeseed leaves 9.9 to 16.3%. Solvent extraction drops residual oil below 1%. French Oil Mill Machinery reports similar figures: screw pressing leaves 4.0% to 8.0%, and solvent extraction reaches less than 2.0%, sometimes down to 1.0% or less.
| Extraction method | Residual oil content in meal |
|---|---|
| Mechanical (screw pressing) | 4.0%–10% by weight |
| Cold pressing (rapeseed) | 9.9%–16.3% |
| Pressing after cooking (rapeseed) | 9.7%–15.7% |
| Double pressing (rapeseed) | 8.7%–13.5% |
| Solvent extraction | under 1%–2% |
Impact on Residual Oil and Meal Value
Residual oil shapes meal economics. A Nature study notes that residual oils are the primary compounds extractable from oilseed meals, and a considerable amount remains even after extensive oil extraction. Re-extracting these oils serves food, pharmaceutical, healthcare, and biofuel markets. This step prevents waste and raises the economic value of by-products. High-fat meal from expeller pressing suits dairy feed, and low-fat meal from a solvent expelled route suits high-protein feed rations. Buyers of expeller pressed oil often pay premiums for chemical-free labels, and canola oil from either route meets feed and food standards when processed correctly.
Capital and Operating Costs
Upfront Investment in Oilseed Processing Equipment
Capital outlay scales steeply with capacity. Fostechnos reports that a small mechanical expeller unit for 1–10 TPD costs USD 100,000–300,000. A medium pre-press plus solvent extraction plant for 50–200 TPD runs USD 600,000–1.8 million. A large industrial solvent extraction complex above 500 TPD demands a multi-million-dollar investment.
| Plant / Equipment Type | Capacity | Capital Cost Range (USD) |
|---|---|---|
| Small mechanical expeller unit | 1–10 TPD | USD 100,000–300,000 |
| Medium pre-press + solvent extraction plant | 50–200 TPD | USD 600,000–1.8 million |
| Large industrial solvent extraction complex | 500+ TPD | Multi-million-dollar investment |
A buyer of oilseed processing equipment pays for more than the press itself. Ancillary systems add cost: cleaning, flaking, conditioning, and filtration. A solvent expelled line also needs a distillation and solvent recovery circuit. These extras push the total for vegetable oil solvent extraction equipment well above the bare machine price.
Ongoing Operating Expenses
Daily costs tell a different story. A screw press burns power and wears parts, yet it needs no solvent inventory. Solvent extraction equipment consumes solvent, steam, and electricity, and solvent losses add a recurring charge. Labor and maintenance follow plant complexity. A simple press demands fewer skilled operators. A full solvent extraction line needs trained staff and tighter process control. Energy use per ton of seed favors the mechanical route at small scale. The solvent route wins on energy per ton of recovered oil at large scale. Buyers should weigh oil extraction cost over the full equipment life, not the sticker price alone. A careful review of oil processing equipment budgets prevents surprises later.
Scalability and Throughput
Small and Mid-Scale Operations
Small plants value flexibility over volume. A batch type solvent extraction plant handles 10–100 TPD, and Fostechnos notes that operators can switch between seed types with ease. Seasonal operation suits this design well. Mechanical presses cover the smallest end of the range. Fostechnos data places mechanical and cold press throughput at 1–50 TPD, while solvent extraction equipment serves 50–1,000+ TPD. A regional miller weighing oil extraction options should note one threshold. Fostechnos reports that a solvent extraction plant needs at least 100 TPD to stay financially viable, because fixed costs per tonne climb sharply below that line. A 100 TPD soybean plant typically recovers its investment in three to five years.
Large-Scale Industrial Processing
Large processors pursue throughput and low unit cost. A continuous solvent extraction plant runs 100–5,000+ TPD without interruption, and Fostechnos identifies it as the route to the lowest operating cost per tonne. Turnkey solvent extraction equipment bundles civil, mechanical, electrical, and commissioning work into one contract. An integrated extraction cum refinery combines oilseed processing with degumming, neutralization, bleaching, and deodorization. The Fostechnos chart below compares minimum capacities across these plant types.
A solvent expelled or solvent expelling line at this scale pairs a pre-press with vegetable oil solvent extraction equipment to capture the last fraction of oil. Fostechnos ties plant scale to investment: 500–1,000 TPD demands INR 40–90 crore, and 1,000–5,000+ TPD exceeds INR 90 crore.
Product Quality and Characteristics
Oil Quality Differences
Oil quality diverges between the two routes. Expeller pressing relies on mechanical force alone, so the oil retains natural flavor compounds and minor components. The screw oil press generates heat during operation, and this heat can alter delicate flavor notes. Solvent extraction strips more oil from the seed, yet trace solvent residues demand careful removal during distillation. Refining follows either route for commodity oils. Cold-pressed and expeller pressed oil appeal to buyers who prioritize minimal processing. Expeller pressed canola oil carries a distinct nutty profile that specialty markets value. Standard canola oil from solvent extraction offers neutral taste and consistent performance in frying and baking applications.
Meal and Byproduct Considerations
Meal quality shapes feed markets. Resacasun reports that solvent extraction produces higher-protein meals, and soybeans at 18% oil retain only 1.5% oil after processing. The expeller press removes roughly half the oil on the first pass. Residual oil raises the energy content of expeller meal, which helps meet livestock fat requirements. Ruminant nutrition also favors expeller meal for its bypass protein content. Non-GMO feed programs prefer the chemical-free expeller route. A solvent expelled line blends both approaches and captures the benefits of each. The table below summarizes key differences.
| Attribute | Solvent Extraction | Expeller Press (Screw Press) |
|---|---|---|
| Oil removal efficiency | More efficient in removing oil | Mechanical force; first press removes about 50% of the oil |
| Meal protein | Results in higher protein meals | — |
| Residual oil | Soybeans are 18% oil; after solvent extraction only 1.5% oil remains in the soybean meal | — |
| Energy content | — | Higher in energy, making it easier to meet energy and fat requirements of livestock |
| Chemical use | Uses a solvent like hexane, ethanol, or a mixture of the two | Chemical-free way of removing oil from oilseeds |
| Bypass protein | — | Better protein source for ruminants as there is more bypass protein for cows, sheep, and goats |
| Non-GMO suitability | — | Preferable in non-GMO feeds |
| Byproducts | High protein meal and oil | High protein meal and oil |
Resacasun notes that roughly 99% of soybean meal produced in the United States is solvent extracted. This figure reflects the dominance of large-scale processing for commodity feed markets.
Regulatory, Safety, and Operational Factors
Compliance and Safety Requirements
Hexane drives the safety agenda in solvent extraction. Agrifam Group notes that hexane vapor creates fire and explosion hazards, and solvent leaks raise both safety and environmental problems. Plants counter these risks with explosion-proof electrical systems, proper ventilation, and continuous vapor monitoring. The EPA identified n-hexane as the hazardous air pollutant emitted in the largest quantity from vegetable oil production, and its NESHAP rule restricts plant-wide hexane emissions across eight oilseed types, including soybean, canola, and sunflower. Operators of solvent extraction equipment also face layered permits.
| Permit / Control | Scope |
|---|---|
| Air emission permits | Address volatile organic compound releases from solvent evaporation |
| Wastewater discharge permits | Cover any process water that leaves the facility |
| Hazardous waste regulations | Apply to spent solvents and contaminated materials |
A credible supplier safety package covers several review areas:
- Closed-loop solvent circulation and recovery design
- Extractor sealing and leak prevention
- Vapor condensation and vent treatment
- Hazardous-area electrical classification
- Gas detection and alarm systems
- Emergency shutdown logic and interlocks
Buyers should verify certifications for their own jurisdiction.
Operational Complexity
The two routes demand different operating skill sets. Anderson International reports that solvent extraction plants require dedicated equipment, specialized expertise, skilled labor, and regulatory certifications. A solvent expelled line adds distillation and recovery steps, so trained staff and tight process control become essential. A screw press runs on simpler routines, and a small crew can manage daily operation. Repairs differ as well. Anderson International notes that screw press subassemblies can prove complicated to repair and replace, often requiring removal of the entire component. A vegetable oil solvent extraction equipment line spreads maintenance across more systems, yet each task demands higher technical competence.
Quick Comparison Table
A single side-by-side view helps buyers weigh mechanical pressing and solvent extraction without flipping back through earlier sections. The table below consolidates the dimensions that matter most: recovery, cost, scale, quality, and safety. Each row reflects the analysis above, and no single row decides the outcome on its own.
| Dimension | Screw Press (Expeller) | Solvent Extraction |
|---|---|---|
| Core mechanism | Mechanical force squeezes oil from seed | Chemical solvent dissolves and recovers oil |
| Residual oil in meal | 4.0%–10% by weight (cold pressing of rapeseed: 9.9%–16.3%) | Under 1%–2% |
| Typical throughput | 1–50 TPD; single machines often 1–20 TPD | 50–1,000+ TPD; single lines 300–600 TPD |
| Capital cost | USD 100,000–300,000 for 1–10 TPD | USD 600,000–1.8 million for 50–200 TPD; multi-million above 500 TPD |
| Operating cost profile | Low solvent cost, higher energy per ton of recovered oil at scale | Solvent losses and steam add recurring cost; lowest cost per tonne at large scale |
| Oil quality | Retains flavor and minor components; heat can alter delicate notes | Neutral, consistent oil; trace solvent removal required |
| Meal value | Higher residual oil and bypass protein suit ruminant feed | Higher protein meal suits high-protein rations |
| Chemical use | None | Hexane, ethanol, or a mixture |
| Safety focus | Heat, moving parts, wear | Fire and explosion hazards, vapor monitoring, emission permits |
| Best fit | Small and mid-scale, cold-pressed, organic, non-GMO | Large-scale commodity crushing |
Performance data from a Nature study sharpens the recovery and energy picture. The study measured oil yield and energy use across several extraction routes, and the results show where each method earns its place.
| Extraction method | Oil yield | Energy consumption | Production cost | Other conditions |
|---|---|---|---|---|
| Screw press (Model 4, optimized) | 19% | 3.8 Wh | — | Extraction temperature: 172.5 °C; screw speed: 1400 rpm; processing time: 29.85 s |
| Screw press (optimized operating conditions) | 9.17–20.85% | Minimal energy consumption | Lower production cost per kilogram of oil (no solvent consumption, lower energy input) | — |
| Soxhlet extraction (n-hexane) | 35% (highest) | — | Highest production cost per kilogram of oil | — |
| SXE with n-hexane | 31.5–35.5% | — | — | Solvent volume dependent |
| SXE with ethanol | 22.4–25% | — | — | Solvent volume dependent |
| Maceration with n-hexane | 15–16% | — | — | — |
| Hydraulic press | 10–11% | — | — | 150 bars |
The Nature figures confirm the trade-off at the heart of this comparison. Solvent routes reach the highest yields, and the screw press wins on energy input and production cost per kilogram of oil. A buyer who needs maximum recovery accepts higher processing cost. A buyer who prizes low energy use and no solvent inventory accepts a lower yield.
Scale data from PMC and industry suppliers fills in the throughput picture. Most full presses process 10 to 100 tonnes of oily material per day, according to PMC. Modern plants reach about 800 tonnes per day with installed motors up to 630 kW, and manufacturers already plan machines with drive sizes close to 1 MW. Best Oil Press Machines reports that a single solvent extraction line handles 300–600 tons of raw material per day and cuts unit production cost. The same source notes that single screw press machines typically handle only 1 to 20 tons per day, which makes large-scale supply hard to meet with pressing alone.
Investment tracks capacity closely. ABC Machinery publishes the following estimates for cotton seed oil projects, and the pattern carries over to other oilseeds.
| Production Output (ton/day) | Equipment / Project | Estimated Investment (USD) | Notes |
|---|---|---|---|
| < 2 ton/day | — | 20,000–40,000 | Equipment material: stainless steel or carbon steel |
| 2–10 ton/day | — | 30,000–80,000 | Equipment material: stainless steel or carbon steel |
| 10–20 ton/day | — | 50,000–100,000 | Equipment material: carbon steel |
| > 20 ton/day | — | >100,000 | Rotocel extractor suggested |
Best Oil Press Machines frames the same range in equipment terms. Screw oil press models run from small 1–5 tons/day units to medium 20–50 tons/day units, and operators adjust the choice to factory scale. A solvent extraction line serves the high-volume end, where unit cost falls as throughput rises.
Quality standards and certifications shape the final decision. French Oil Mill Machinery notes that its Achiever models can serve as prepresses ahead of solvent extraction. The company also builds screw presses that water-cool the main cages and shaft, and this design reduces rising temperatures during cold pressing or traditional full pressing. Lower heat means less degradation of press cake and seed oil, a lighter color cake, and higher quality oil. Buyers who target premium cold-pressed labels should confirm this cooling capability with their supplier.
Certification requirements differ by market and by equipment type. Sunrise Rendering lists the marks that buyers commonly request on oil screw presses.
| Standard / Certification | Issuing Body | Scope / Meaning |
|---|---|---|
| ASME standards | American Society of Mechanical Engineers | Design, fabrication, and inspection of pressure vessels; compliance confirms safe use and quality |
| ISO standards | International Organization for Standardization | Quality management, environmental management, occupational health and safety |
| CE Mark | European Union | Meets EU safety, health, and environmental requirements |
| UL Mark | Underwriters Laboratories | Tested and meets UL safety standards |
| API Monogram | American Petroleum Institute | Meets API standards for design, manufacturing, and testing |
A solvent extraction equipment purchase adds a second layer of review. Buyers should confirm explosion-proof electrical classification, vapor monitoring, and emission permits alongside the standard marks. A vegetable oil solvent extraction equipment package that bundles these controls into one contract reduces integration risk. The quick table above gives a starting map, and the decision framework in the next section turns it into a step-by-step evaluation.
Decision Framework
A sound decision follows a structured path. The framework below turns the earlier comparison into a practical evaluation. It starts with the questions a project team must answer, then narrows the choice by oilseed type. Each step builds on verified data rather than assumptions.
Key Questions to Ask
The first question should be: Where does the oil go? A project team maps oil in the raw seed, oil in the crude oil stream, oil retained in meal or cake, process losses, and recoverable by-products. This mass-balance review anchors every later decision. Smallagrimachinery.com frames the same idea around target throughput. A processor at industrial volumes likely needs hexane or a hybrid route. A brand sensitive to solvent usage may prefer a mechanical core, ethanol, or CO₂, though that choice gives up some yield or adds cleanup cost. The team must also ask whether it can handle complexity. Solvent systems demand tight engineering, recovery systems, safety protocols, and monitoring. A final question covers flexibility. A mechanical core plus optional solvent or CO₂ modules lets a plant scale without lock-in.
A useful preliminary mass-balance review covers several inputs. The Ande Group lists incoming seed composition, moisture and impurity levels, preparation losses, crude oil production, oil retained in press cake or extracted meal, fines and entrainment losses, oil quality and refining requirements, and meal or cake protein, moisture, fiber, and heat-treatment requirements. The team should verify these values through qualified laboratory work, supplier references, pilot trials, or contractual performance testing. A decision built on unverified numbers carries hidden risk.
Cost and value factors deserve their own set of questions. The Ande Group organizes these into a table that a project team can work through line by line.
| Cost or value factor | Questions for the project team |
|---|---|
| Oil recovery | How much oil remains in cake or meal under the proposed conditions? |
| Oil quality | Will the route produce crude oil that fits the intended refining scheme? |
| Meal value | Does the process preserve the required protein quality and nutritional characteristics? |
| Energy | What are the expected steam, electricity, cooling, and compressed-air requirements? |
| Maintenance | What are the wear parts, inspection intervals, and expected downtime? |
| Labor | How many trained operators and maintenance personnel are required? |
| Environmental control | What systems manage dust, odor, vapor, wastewater, and emissions? |
| Expansion | Can the plant add capacity without replacing core equipment? |
| Financing | How does the total installed cost affect project risk and debt service? |
A solvent route adds design questions of its own. The Ande Group notes that the project must account for extractor design and residence time, miscella concentration and separation, solvent recovery efficiency, desolventizing and toasting conditions, steam and heat integration, vapor containment and monitoring, fire and explosion protection, meal quality and final moisture, and operator training and emergency response. These items belong in the evaluation from day one. A team that defers them faces costly redesign later.
Supplier documentation closes the question set. The Ande Group recommends that buyers request seven items before signing. A process flow diagram with all major utility and safety interfaces comes first. A clear list of equipment included and excluded from the supply scope follows. Design conditions for seed moisture, impurities, temperature, and throughput come next. Guaranteed or target performance values with test methods and acceptance conditions rank fourth. Maintenance requirements for presses, extractors, pumps, conveyors, and heat exchangers come fifth. Environmental and occupational safety documentation for the proposed design ranks sixth. References for plants with comparable feedstock, capacity, and product objectives complete the list. A supplier who cannot provide these items signals risk.
The financial model should reach beyond equipment price. The Ande Group advises calculating total installed capital cost, civil, electrical, and utility infrastructure, commissioning and training, energy and consumables, labor, maintenance and spare parts, expected downtime, oil and meal revenue, environmental compliance cost, financing and working capital, and expansion and replacement cost. A simple model can compare annual value under each route:
Net operating value = oil revenue + meal revenue − energy cost − labor − maintenance − consumables − environmental cost − downtime impact
This formula forces the team to weigh both routes on the same terms. A low sticker price can hide high operating cost, and a high capital figure can mask strong long-run returns.
Matching Method to Oilseed
Oilseed type shapes the choice as much as scale does. Soft seeds with moderate oil content suit mechanical pressing well. High-oil seeds often justify a pre-press followed by solvent extraction. The table below maps common seeds to their typical route.
| Oilseed | Typical oil content | Common processing route | Notes |
|---|---|---|---|
| Soybean | About 18%–20% | Solvent extraction or pre-press plus solvent | Low oil content favors solvent recovery; most U.S. soybean meal is solvent extracted |
| Canola / rapeseed | About 40%–45% | Pre-press plus solvent, or full pressing for specialty | Cold pressing suits premium canola oil; solvent route suits commodity volume |
| Sunflower | About 40%–50% | Pre-press plus solvent, or screw pressing | High oil content makes pre-pressing attractive before solvent finishing |
| Cottonseed | About 18%–25% | Solvent extraction or screw pressing | Delinting and hulling precede either route |
| Peanut | About 45%–50% | Screw pressing for specialty, solvent for volume | Cold-pressed peanut oil commands premium pricing |
| Flaxseed | About 35%–45% | Cold screw pressing | Heat-sensitive oil favors low-temperature mechanical pressing |
| Sesame | About 45%–55% | Screw pressing | Small-scale and specialty markets dominate |
Soybean illustrates the scale effect clearly. Its low oil content makes mechanical pressing less efficient per ton, and the solvent route recovers nearly all the oil. A small specialty operation may still press soy mechanically for non-GMO or organic labels. Canola oil sits at the other end of the spectrum. Its high oil content supports a pre-press step, and the remaining oil goes to solvent extraction equipment for final recovery. A specialty producer may cold-press canola for a premium nutty profile. A commodity crusher runs the solvent route for neutral, consistent oil.
Heat sensitivity guides the choice for flaxseed and similar seeds. Delicate oils lose flavor and minor components under high temperature. A screw press with water-cooled cages keeps temperatures lower and protects oil quality. A solvent route adds distillation heat and demands careful control. A processor who targets cold-pressed labels should confirm cooling capability with the supplier before committing.
Scale and oilseed interact in the final decision. A 5 TPD flaxseed operation fits a screw press. A 500 TPD soybean plant fits a solvent line. A 100 TPD canola plant may run a pre-press plus solvent combination. The team should test its chosen route against the mass balance, the cost table, and the supplier checklist. A route that passes all three checks earns confidence. A route that fails one check deserves a second look.
The framework does not produce a single answer for every project. It produces a defensible answer for a specific project. A team that works through the questions, matches the method to its oilseed, and verifies the numbers with suppliers and pilot trials will choose the route that fits its scale, budget, and quality targets. Buyers who compare oil extraction methods this way avoid costly mismatches. They also gain leverage in negotiations with suppliers of solvent extraction equipment and vegetable oil solvent extraction equipment, because they know exactly what performance they need and how to measure it.
Application Scenarios by Oilseed
Oilseed type often points to a clear processing route. High-oil seeds such as palm kernels, sunflower seeds, rapeseed, and peanuts suit mechanical pressing, according to Grain Oil Press. Low-oil seeds such as soybeans, cottonseeds, and corn germ fit solvent extraction better. The table below summarizes the split.
| Oilseed | Oil Content | Preferred Method |
|---|---|---|
| Soybeans | 18–20% | Solvent extraction (preferred for large-scale operations) |
| Palm kernels | 45–55% | Mechanical pressing |
| Sunflower seeds | 35–45% | Either method depending on scale and product requirements |
French Oil Mill Machinery reports broad experience across most oil-bearing materials. The company lists soybeans, cottonseed, canola seed, rapeseed, sesame seed, flaxseed, palm kernels, peanuts, corn germ, copra, rice bran, safflower seed, sunflower seed, castor beans, linseed, and walnut meats among the materials it processes.
French has experience in processing most oil-bearing materials including soybeans, cottonseed, canola seed, rapeseed, sesame seed, flaxseed, palm kernels, peanuts (groundnuts), corn germ, copra, rice bran, safflower seed, sunflower seed, castor beans, linseed, babassu nuts, tung nuts, walnut meats, etc.
Canola shows how scale reshapes the choice. A specialty producer may run an expeller press for expeller pressed canola oil with a nutty profile. A commodity crusher favors solvent expelled canola oils for neutral, consistent canola oil at high volume. Both routes serve oilseed processing well when the operator matches method to market.
No universal winner exists between screw pressing and solvent extraction. Project scale, budget, quality targets, and regulatory context drive the decision. A small cold-press operation and a large commodity crusher need different routes. Readers should test their own requirements against the decision framework. They should also consult oilseed processing equipment suppliers for tailored guidance. A supplier can confirm whether a screw press or solvent extraction line best fits a given canola oil project.
FAQ
Which method suits a small startup with a limited budget?
A screw press fits a small startup best. Entry costs run USD 100,000–300,000 for 1–10 TPD. A solvent line needs at least 100 TPD to stay viable, so small operators choose mechanical pressing.
Is solvent extraction safe for operators and nearby communities?
Modern plants manage the risks well. Explosion-proof wiring, vapor monitoring, and closed-loop solvent recovery control hexane hazards. Regulators cap emissions, and trained crews follow strict safety protocols.
Can a processor add solvent extraction later without replacing the screw press?
Yes. Many plants start with a screw press and later add a solvent line. The existing press becomes a pre-press unit. This staged path lets buyers of oilseed processing equipment scale gradually and control capital risk.